Snooker Table Maintenance & Accessories by JSS - the "Old Cues" Specialist

Billiards and Snooker, Billiard Cues, Snooker Cues, Old Cues, Billiards Accessories & Snooker Accessories from J.S.S. Billiards & Snooker.

"OLD" CUES 4

Looking for something special? Then look below! We have an excellent selection of much sought after classic cues. If we haven't got the cue you want let us know and we'll try to provide it for you.

REF
Details on Nameplate

CUE DESCRIPTION

K87
BURROUGHS
&
WATTS
LTD
19, SOHO SQUARE
LONDON W.1

Hand Spliced, Burr Walnut? ‘Butterfly Spliced’ Butt, Ash Shaft with no ferrule, 12mm tip, weight marked 16½ozs.

• OLD CUE THIS ONE AND RATHER UNUSUAL IF IT IS BURR WALNUT SPLICING.

K90
SMITH
&
NELSON
THE
SPORTSMAN
CUE

Machine Spliced, Rosewood Butt, New Purple Heart Front Splice with Maple and Green Veneers, Ash Shaft, 11mm tip with original Brass Ferrule, 58” long, Marked 17ozs.

• THIS CUE HAS HAD A NEW FRONT SPLICE AS SOMEONE HAD DEEP-CARVED THEIR NAME IN IT PREVIOUSLY.
• ORIGINAL NAMEPLATE IN GOOD CONDITION. with NEW BRASS SCREWS
• THEY DON’T CROP UP EVERY DAY – WON’T BE HERE LONG.

K93
THE
ATLAS
PRESENTATION
CUE

Double Spliced Cue, Machine spliced, Rosewood Butt overlaid with Hand Spliced Ebony and Green Veneers, Maple Shaft, Brass Ferrule with 11mm tip, 58¼” long, Weight 16ozs.

• CUE FROM THE 1960’s
• NICE CLEAN CUE JUST NEEDS ATTENTION TO THE FERRULE AREA (cleaning up)
• CUE HAS BEEN USED UP TO RECENTLY SO WHILST STILL HAVING ORIGINAL LACQUER ON THE CUE HAS NORMAL WEAR AND TEAR MARKS.

K96
HORACE LINDRUM
CHAMPION
CUE

REALLY UNUSUAL

Double Spliced, Machine Spliced Rosewood Butt overlaid with Three Maccassar Splices on sides and back – the front Splice in line with nameplate being in Bubinga with Maple Veneer. Maple Shaft, 58” long, Brass Ferrule with 11mm tip, Weight stamped 16ozs and is.

• I HAVE NEVER SEEN A CUE LIKE THIS USUALLY THEY ARE JUST MACHINE SPLICED (see my other).
• FOR THIS TO BE WRONG I CAN ONLY THINK THAT IT WAS SERVERLY DAMAGE IN THE BUTT – OR – IT’S A “ONE-OFF” MADE FOR A CLIENT ---- HOWEVER, YOU WILL NOTICE THAT THE NAMEPLATE HAS BEEN OFF AT SOME STAGE FOR IT APPEARS TO BE GLUED AND PINNED TO PREVENT IT FROM COMING OFF AGAIN.
• WHATEVER! IT’S A ‘POKER’ OF A CUE – ABSOLUTELY STIFF AS A BOARD.

One final thing – if the nameplate had been taken off to have the hand splicings done then as they have obviously been carried out professionally they would have replaced the nameplate with original or new brass screws ----- something to ponder on for you out there????

K100
Permac
Olympic

Machine Spliced, Rosewood Butt with green veneers – with Four ‘Bubinga’ Hand Splices around the Butt, Maple Shaft with Original Fibre Ferrule,58” long, 11mm Tip, weight marked 16ozs.

• LIKE ‘K1’ – THIS IS AN EXCELLENT CUE THAT JUST NEEDS A GOOD HOME.
• IDEAL FOR SOMEONES ‘DAD’ WHO LIKE THE ODD GAME.
• SOMEONE AS YOU CAN SEE HAS MARKED THE CUE WITH THREE CUTS ON THE NAMEPLATE - BUT ITS NOTHING.

K101

Horace
Lindrum
Picture Badge
Cue

Machine Spliced, Rosewood Butt, Bubinga Front Splice with Maple Veneer, Maple Shaft , 60¼” long, Brass Ferrule,10¾mm Tip, Weight stamped 16½ozs.

• ANOTHER LONG CUE IN GREAT CONDITION.
• ( SEE K76 & 77 )

< 1 2 3 4 5 6 >

BACK - CONTENTS - CONTACT - ORDERS / ENQUIRIES

REF	Details on Nameplate	CUE DESCRIPTION

K87	BURROUGHS & WATTS LTD 19, SOHO SQUARE LONDON W.1	Hand Spliced, Burr Walnut? ‘Butterfly Spliced’ Butt, Ash Shaft with no ferrule, 12mm tip, weight marked 16½ozs. • OLD CUE THIS ONE AND RATHER UNUSUAL IF IT IS BURR WALNUT SPLICING.

K90	SMITH & NELSON THE SPORTSMAN CUE	Machine Spliced, Rosewood Butt, New Purple Heart Front Splice with Maple and Green Veneers, Ash Shaft, 11mm tip with original Brass Ferrule, 58” long, Marked 17ozs. • THIS CUE HAS HAD A NEW FRONT SPLICE AS SOMEONE HAD DEEP-CARVED THEIR NAME IN IT PREVIOUSLY. • ORIGINAL NAMEPLATE IN GOOD CONDITION. with NEW BRASS SCREWS • THEY DON’T CROP UP EVERY DAY – WON’T BE HERE LONG.

K93	THE ATLAS PRESENTATION CUE	Double Spliced Cue, Machine spliced, Rosewood Butt overlaid with Hand Spliced Ebony and Green Veneers, Maple Shaft, Brass Ferrule with 11mm tip, 58¼” long, Weight 16ozs. • CUE FROM THE 1960’s • NICE CLEAN CUE JUST NEEDS ATTENTION TO THE FERRULE AREA (cleaning up) • CUE HAS BEEN USED UP TO RECENTLY SO WHILST STILL HAVING ORIGINAL LACQUER ON THE CUE HAS NORMAL WEAR AND TEAR MARKS.

K96	HORACE LINDRUM CHAMPION CUE REALLY UNUSUAL	Double Spliced, Machine Spliced Rosewood Butt overlaid with Three Maccassar Splices on sides and back – the front Splice in line with nameplate being in Bubinga with Maple Veneer. Maple Shaft, 58” long, Brass Ferrule with 11mm tip, Weight stamped 16ozs and is. • I HAVE NEVER SEEN A CUE LIKE THIS USUALLY THEY ARE JUST MACHINE SPLICED (see my other). • FOR THIS TO BE WRONG I CAN ONLY THINK THAT IT WAS SERVERLY DAMAGE IN THE BUTT – OR – IT’S A “ONE-OFF” MADE FOR A CLIENT ---- HOWEVER, YOU WILL NOTICE THAT THE NAMEPLATE HAS BEEN OFF AT SOME STAGE FOR IT APPEARS TO BE GLUED AND PINNED TO PREVENT IT FROM COMING OFF AGAIN. • WHATEVER! IT’S A ‘POKER’ OF A CUE – ABSOLUTELY STIFF AS A BOARD. One final thing – if the nameplate had been taken off to have the hand splicings done then as they have obviously been carried out professionally they would have replaced the nameplate with original or new brass screws ----- something to ponder on for you out there????

K100	Permac Olympic	Machine Spliced, Rosewood Butt with green veneers – with Four ‘Bubinga’ Hand Splices around the Butt, Maple Shaft with Original Fibre Ferrule,58” long, 11mm Tip, weight marked 16ozs. • LIKE ‘K1’ – THIS IS AN EXCELLENT CUE THAT JUST NEEDS A GOOD HOME. • IDEAL FOR SOMEONES ‘DAD’ WHO LIKE THE ODD GAME. • SOMEONE AS YOU CAN SEE HAS MARKED THE CUE WITH THREE CUTS ON THE NAMEPLATE - BUT ITS NOTHING.

K101	Horace Lindrum Picture Badge Cue	Machine Spliced, Rosewood Butt, Bubinga Front Splice with Maple Veneer, Maple Shaft , 60¼” long, Brass Ferrule,10¾mm Tip, Weight stamped 16½ozs. • ANOTHER LONG CUE IN GREAT CONDITION. • ( SEE K76 & 77 )
< 1 2 3 4 5 6 > BACK - CONTENTS - CONTACT - ORDERS / ENQUIRIES